起订:1套
供应:9979套
发货:5天内
本公司产品为满足矿井、油田、钢铁、铁路、电业、公安、民用照明、割胶农民等企业对移动防爆照明灯具的需要，研制开发的新型免维护LED矿灯，经国家权威机构防爆认证，可在各种易燃易爆场所、水下及其他工作现场安全工作。
一、性能特点
防爆功能 本产品已通过国家权威机构防爆和煤安认证，完全按照国家防爆标准生产，具有优良的防爆、防静电效果，可在各种易燃易爆场所安全工作(包括含有氢、乙炔、甲烷及其他混合气体的环境)。
采用高效率的半导体发光技术，；
质量稳定 高能无记忆电池容量高，充放电性能稳定，自放电率低。前壳采用高强度ABS塑料，后壳采用超不碎工程塑料，使产品有高耐冲击性。光学部分采用长寿命LED芯片1W发光二极管，无需更换。
防水性能 精密的结构能确保该灯可经受强力碰撞和冲击，外壳防护等级为IP66；
功能独特 采用两套光源，分主灯和备用灯，由一个旋钮开关更换。外形美观，体积小，重量轻，产品一体化，无束缚，减轻工人的负载，提高工作效率。
User manual
Please read it carefully before using!
Standard: GB7957-2003
Summarization
1. Application and characteristic
RD500 is special illuminating lamp for workers carrying individually under mine.
This series is our new self-designed generation product. It adoptsLI-ION battery, LED
double light sources, with smart size and light weight, free maintenance li-ion battery, and long life LED.
2.Working conditions
Temperature:-20-60℃
3. Standard
GB 7597-2003General Requirement for Miner's Lamp Safety
MT 242-2004KL Series Miner's Lamp
Q/JY 069-2006KL Series Miner's Lamp
4. Explosion-proof type: Exs I
Structure
1. This series lamp is portable, the lamp head and battery part are connected by cable's upper
cover to be a whole miner's lamp. Lamp head could be fixed on cap lamp.
2. A LED main light source is installed in, several LED auxiliary light sources.
Clockwise turn on switch, main source and auxiliary sources illuminate alternatively.
3. This battery case is designed with closed wear-ring, convenient for carrying.
4. PTC self-protection is set between battery group, and reusable short circuit protective
device is set on cable's battery end. Thus, this is very safe and reliable.
Technical Parameter
FORM1
|
No. |
Rated capacity (Ah) |
Rated voltage (V) |
Lighting time |
LED main light source parameter |
Life of service |
Valid storage period |
Weight (g) |
|||
|
Voltage (V) |
Current (A) |
Luminance(lx) |
||||||||
|
Lighting start |
Lighting 18h |
|||||||||
|
1 |
6 |
3.6 |
≥20 |
3.6 |
0.3 |
7500 |
7000 |
600 |
half a year |
505 |
Usage and maintenance
1. The battery is charged with more than3/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Follow the charging set user manual, connect to power supply, plug lamp head into charging
socket, clockwise turn 180 degree to make charging points contact well, watch whether the
indicator is normal. It will take8-10 hours to be charged fully.
2. Charge with matched charging set or unit charger.
3. Please turn off lamp when charging.
4. If any damage happened in using, give it to check department after leaving mine well, and
maintain by professional person with special tool, don't open lamp yourself, especially under
mine.
5. Don't over discharge lamp, use it in stipulated time, otherwise, battery's capacity and life
of service would be reduced.
6. If lamp head happened short circuit in maintenance or other operation, disposal the faulty,
and restart the lamp, it will work normally.
7. If the lamp was not used usually, please charge per three months in storage period.
8. Don't acutely knock or collide lamp in carrying or using, to avoid damage to any parts to
affect normal warning.
Fault analysis and elimination
RDMiner's Lamp Fault Analysis and Elimination
|
Fault rformance |
Reason analysis |
Eliminate method |
Remarks |
|
lamp no light |
1.cable broken 2.points contact bad 3.weld bad 4.protective device invalidates 5.loop broken or weld split off caused by acute shake 6.battery fault 7.LED damaged by acute shake or wrong usage 8.constant current driving board or any parts damaged by acute shake |
1.change a new one 2.make points contact well 3.reweld 4.change by our company's after-sale worker 5.reweld 6.discard 7.change a new LED 8.change driving board |
In stipulated using period, if damage caused by unartificial reason, and met with discarding, our company can replace it for you. |
hipment and storage
1. No acute impact, insolation and rain, don't inverse the package, roll or heavily press it.
2. Store in dry, clean, ventilate warehouse with temperature 0-40℃, and there is no sulfid or
such corrosive elements. Storage period is half a year, if more than this period, battery capacity and life of service would be affected
Unpacking and check
1. Please make sure whether the package is good, user manual, certificate and accessories are
complete.
2. Check whether lamp appearance is ok.
3. The battery is charged with more than 1/4 power when shipped out of factory, turn on the
switch to make sure it can illuminate normally. If it was in good condition, charge and use it.
Charging :
1.Charger input: AC100-240V 50-60Hz , 0.5A
2.Charger output : DC 4.2V@1000mA
3.Manufacturer provide charger to user , please use it only
4.When long-term storage is needed , charging should be done within two months.
Notices
1. Don't use lamp lack of any parts under mine.
2. Maintaining and charging must be on land.
3. Don't change structure or any parts arbitrarily, or change any parts' parameter and specs in
maintenance.
4. Don't use lamp in other purpose, as smoking, firecrackers, etc.
5. Don't close to or throw in fire.
6. If fault happened, maintain it once left mine well, don't take fault lamp to well.
7. Centrally manage discarded lamps, and recycle them by professional unit or miner's lamp factory.
